GN 442 Threaded Plugs Aluminum, with Finger Grip, Resistant up to 392 °F

Identification no.: 1 - Without vent hole
Color: BL - Plain, tumbled finish

Standard Sheet GN 442 Print This Page

Product description

The outer diameter d₁ of GN 442 threaded plugs is matched to screw-in holes for pipe fittings according to DIN 3852.

The seal is embedded in a radial recess, and thus cannot be lost or squeezed out during tightening.

Specification

Body
Aluminum

Powder coated
Black, RAL 9005, textured finishSW
Plain, tumbled finishBL

Seal
Rubber FPM (Viton^®)

Identification by non-black coloring of the seal
Temperature resistant up to 392 °F (200 °C)

RoHS

On request

With dipstick

GN 442 Aluminum Threaded Plugs, with Finger Grip, Resistant up to 392 °F sketch

Hide technical drawing

Part Options / Table

Identification no.

1	Without vent hole
2	With vent hole

Part Number SW	Part Number BL	d₁	d₂ Pipe thread	Fine thread	d₃ Vent hole	d₄ Thread	l₁ ±0.02	l₂	l₃	s	t min.

442-22-M16X1.5-1-SW	442-22-M16X1.5-1-BL	0.87	-	M 16 x 1.5	0.08	M 5	1.02 ±0.02	0.31	0.59	0.20	0.31
442-22-G3/8-1-SW	442-22-G3/8-1-BL	0.87	G 3/8	-	0.08	M 5	1.02 ±0.02	0.31	0.59	0.20	0.31
442-26-M20X1.5-1-SW	442-26-M20X1.5-1-BL	1.02	-	M 20 x 1.5	0.08	M 5	1.08 ±0.02	0.33	0.63	0.20	0.31
442-26-G1/2-1-SW	442-26-G1/2-1-BL	1.02	G 1/2	-	0.08	M 5	1.08 ±0.02	0.33	0.63	0.20	0.31
442-32-M26X1.5-1-SW	442-32-M26X1.5-1-BL	1.26	-	M 26 x 1.5	0.08	M 5	1.14 ±0.02	0.35	0.67	0.24	0.31
442-32-G3/4-1-SW	442-32-G3/4-1-BL	1.26	G 3/4	-	0.08	M 5	1.14 ±0.02	0.35	0.67	0.24	0.31
442-40-G1-1-SW	442-40-G1-1-BL	1.57	G 1	-	0.08	M 5	1.28 ±0.02	0.43	0.71	0.28	0.31

Part Number SW	Part Number BL	d₁	d₂ Pipe thread	Fine thread	d₃ Vent hole	d₄ Thread	l₁ ±0.02	l₂	l₃	s	t min.

442-22-M16X1.5-2-SW	442-22-M16X1.5-2-BL	0.87	-	M 16 x 1.5	0.08	M 5	1.02 ±0.02	0.31	0.59	0.20	0.31
442-22-G3/8-2-SW	442-22-G3/8-2-BL	0.87	G 3/8	-	0.08	M 5	1.02 ±0.02	0.31	0.59	0.20	0.31
442-26-M20X1.5-2-SW	442-26-M20X1.5-2-BL	1.02	-	M 20 x 1.5	0.08	M 5	1.08 ±0.02	0.33	0.63	0.20	0.31
442-26-G1/2-2-SW	442-26-G1/2-2-BL	1.02	G 1/2	-	0.08	M 5	1.08 ±0.02	0.33	0.63	0.20	0.31
442-32-M26X1.5-2-SW	442-32-M26X1.5-2-BL	1.26	-	M 26 x 1.5	0.08	M 5	1.14 ±0.02	0.35	0.67	0.24	0.31
442-32-G3/4-2-SW	442-32-G3/4-2-BL	1.26	G 3/4	-	0.08	M 5	1.14 ±0.02	0.35	0.67	0.24	0.31
442-40-G1-2-SW	442-40-G1-2-BL	1.57	G 1	-	0.08	M 5	1.28 ±0.02	0.43	0.71	0.28	0.31

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁	d₂ Pipe thread	Fine thread	d₃ Vent hole	d₄ Thread	l₁ ±0.02	l₂	l₃	s	t min.

0.87	G 3/8	M 16 x 1.5	0.08	M 5	1.02	0.31	0.59	0.20	0.31
1.02	G 1/2	M 20 x 1.5	0.08	M 5	1.08	0.33	0.63	0.20	0.31
1.26	G 3/4	M 26 x 1.5	0.08	M 5	1.14	0.35	0.67	0.24	0.31
1.57	G 1	-	0.08	M 5	1.28	0.43	0.71	0.28	0.31

Build & Price

Selected Part

Part Number

Total (net)

Mex$158.40

Available within 2 weeks

Quantity

Create project list

Save as Favorites

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	99	Mex$158.40
100	249	Mex$145.20
250	499	Mex$132.00
≥ 500		Mex$118.80

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.026 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021