The cart is empty.

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time

+52(81)2721-4021 ventas@jwwinco.mx

Request Callback

Full name Phone number Company Country Yes, I have noted the Privacy Policy.

JW Winco Handbook
JW Winco’s handbook will support designers and engineers with the largest selection of standard parts.

Request Free Catalogs
Your Contact

You are looking for a Winco partner near you?

Please select the country. Select State

Send a message

JW Winco News
All the information you need about news from JW Winco!

All News

DIN 908 Threaded Plugs Steel / Stainless Steel, with Collar and Internal Hex

Material: ST - Steel
Type: AA - With aluminum sealing ring

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet DIN 908 Print This Page ISO Fundamental Tolerances Strength Values of Screws Stainless Steel Characteristics

Product description

Threaded plugs DIN 908 are used, for example, on filling, drain or inspection openings of gear boxes and hydraulic tanks.

Specification

Threaded plug

SteelST
- Zinc plated, blue passivated finish
- Property class 5.8
Stainless steelA4 AISI 316 / AISI 316Ti

Sealing washer DIN 7603 (Type AC / AA / AN)

RoHS

Accessory

Sealing Washers DIN 7603

DIN 908 Steel / Stainless Steel Threaded Plugs, with Collar and Internal Hex sketch

Hide technical drawing

Part Options / Table

Type

A	Without sealing ring
AC	With copper sealing ring
AA	With aluminum sealing ring
AN	With stainless steel sealing ring

Part Number A - Without sealing ring	Part Number AC - With copper sealing ring	Part Number AA - With aluminum sealing ring	Part Number AN - With stainless steel sealing ring	d₁ Fine thread Steel ST	Stainless steel A4	Pipe thread Steel ST Stainless steel A4	d₂ h14	d₃	d₄ Outer Ø sealing washer	l₁ ±0.008	l₂ +0.02	s	A/F in mm


908-ST-M8X1-A				M 8 x 1	-	-	0.472 h14	0.33	-	0.315 ±0.008	0.12 +0.02	-	4
	908-ST-M8X1-AC	908-ST-M8X1-AA	908-ST-M8X1-AN	M 8 x 1	-	-	0.472 h14	0.33	0.45	0.315 ±0.008	0.12 +0.02	0.04	4
908-A4-M8X1-A				-	M 8 x 1	-	0.472 h14	0.33	-	0.315 ±0.008	0.12 +0.02	-	4
	908-A4-M8X1-AC	908-A4-M8X1-AA	908-A4-M8X1-AN	-	M 8 x 1	-	0.472 h14	0.33	0.45	0.315 ±0.008	0.12 +0.02	0.04	4
908-ST-M10X1-A				M 10 x 1	-	-	0.551 h14	0.41	-	0.315 ±0.008	0.12 +0.02	-	5
	908-ST-M10X1-AC	908-ST-M10X1-AA	908-ST-M10X1-AN	M 10 x 1	-	-	0.551 h14	0.41	0.53	0.315 ±0.008	0.12 +0.02	0.04	5
908-A4-M10X1-A				-	M 10 x 1	-	0.551 h14	0.41	-	0.315 ±0.008	0.12 +0.02	-	5
	908-A4-M10X1-AC	908-A4-M10X1-AA	908-A4-M10X1-AN	-	M 10 x 1	-	0.551 h14	0.41	0.53	0.315 ±0.008	0.12 +0.02	0.04	5
908-ST-G1/8-A				-	-	G 1/8	0.551 h14	0.39	-	0.315 ±0.008	0.12 +0.02	-	5
	908-ST-G1/8-AC	908-ST-G1/8-AA	908-ST-G1/8-AN	-	-	G 1/8	0.551 h14	0.39	0.53	0.315 ±0.008	0.12 +0.02	0.04	5
908-A4-G1/8-A				-	-	G 1/8	0.551 h14	0.39	-	0.315 ±0.008	0.12 +0.02	-	5
	908-A4-G1/8-AC	908-A4-G1/8-AA	908-A4-G1/8-AN	-	-	G 1/8	0.551 h14	0.39	0.53	0.315 ±0.008	0.12 +0.02	0.04	5
908-ST-M12X1.5-A				M 12 x 1.5	-	-	0.669 h14	0.48	-	0.472 ±0.008	0.12 +0.02	-	6
	908-ST-M12X1.5-AC	908-ST-M12X1.5-AA	908-ST-M12X1.5-AN	M 12 x 1.5	-	-	0.669 h14	0.48	0.63	0.472 ±0.008	0.12 +0.02	0.06	6
908-A4-M12X1.5-A				-	M 12 x 1.5	-	0.669 h14	0.48	-	0.472 ±0.008	0.12 +0.02	-	6
	908-A4-M12X1.5-AC	908-A4-M12X1.5-AA	908-A4-M12X1.5-AN	-	M 12 x 1.5	-	0.669 h14	0.48	0.63	0.472 ±0.008	0.12 +0.02	0.06	6
908-ST-G1/4-A				-	-	G 1/4	0.709 h14	0.53	-	0.472 ±0.008	0.12 +0.02	-	6
	908-ST-G1/4-AC	908-ST-G1/4-AA	908-ST-G1/4-AN	-	-	G 1/4	0.709 h14	0.53	0.71	0.472 ±0.008	0.12 +0.02	0.06	6
908-A4-G1/4-A				-	-	G 1/4	0.709 h14	0.53	-	0.472 ±0.008	0.12 +0.02	-	6
	908-A4-G1/4-AC	908-A4-G1/4-AA	908-A4-G1/4-AN	-	-	G 1/4	0.709 h14	0.53	0.71	0.472 ±0.008	0.12 +0.02	0.06	6
908-ST-M14X1.5-A				M 14 x 1.5	-	-	0.748 h14	0.56	-	0.472 ±0.008	0.12 +0.02	-	6
	908-ST-M14X1.5-AC	908-ST-M14X1.5-AA	908-ST-M14X1.5-AN	M 14 x 1.5	-	-	0.748 h14	0.56	0.71	0.472 ±0.008	0.12 +0.02	0.06	6
908-A4-M14X1.5-A				-	M 14 x 1.5	-	0.748 h14	0.56	-	0.472 ±0.008	0.12 +0.02	-	6
	908-A4-M14X1.5-AC	908-A4-M14X1.5-AA	908-A4-M14X1.5-AN	-	M 14 x 1.5	-	0.748 h14	0.56	0.71	0.472 ±0.008	0.12 +0.02	0.06	6
908-ST-M16X1.5-A				M 16 x 1.5	-	-	0.827 h14	0.64	-	0.472 ±0.008	0.12 +0.02	-	8
	908-ST-M16X1.5-AC	908-ST-M16X1.5-AA	908-ST-M16X1.5-AN	M 16 x 1.5	-	-	0.827 h14	0.64	0.79	0.472 ±0.008	0.12 +0.02	0.06	8
908-A4-M16X1.5-A				-	M 16 x 1.5	-	0.827 h14	0.64	-	0.472 ±0.008	0.12 +0.02	-	8
	908-A4-M16X1.5-AC	908-A4-M16X1.5-AA	908-A4-M16X1.5-AN	-	M 16 x 1.5	-	0.827 h14	0.64	0.79	0.472 ±0.008	0.12 +0.02	0.06	8
908-ST-G3/8-A				-	-	G 3/8	0.866 h14	0.67	-	0.472 ±0.008	0.12 +0.02	-	8
	908-ST-G3/8-AC	908-ST-G3/8-AA	908-ST-G3/8-AN	-	-	G 3/8	0.866 h14	0.67	0.83	0.472 ±0.008	0.12 +0.02	0.06	8
908-A4-G3/8-A				-	-	G 3/8	0.866 h14	0.67	-	0.472 ±0.008	0.12 +0.02	-	8
	908-A4-G3/8-AC	908-A4-G3/8-AA	908-A4-G3/8-AN	-	-	G 3/8	0.866 h14	0.67	0.83	0.472 ±0.008	0.12 +0.02	0.06	8
908-ST-M18X1.5-A				M 18 x 1.5	-	-	0.906 h14	0.72	-	0.472 ±0.008	0.16 +0.02	-	8
	908-ST-M18X1.5-AC	908-ST-M18X1.5-AA	908-ST-M18X1.5-AN	M 18 x 1.5	-	-	0.906 h14	0.72	0.87	0.472 ±0.008	0.16 +0.02	0.06	8
908-A4-M18X1.5-A				-	M 18 x 1.5	-	0.906 h14	0.72	-	0.472 ±0.008	0.16 +0.02	-	8
	908-A4-M18X1.5-AC	908-A4-M18X1.5-AA	908-A4-M18X1.5-AN	-	M 18 x 1.5	-	0.906 h14	0.72	0.87	0.472 ±0.008	0.16 +0.02	0.06	8
908-ST-M20X1.5-A				M 20 x 1.5	-	-	0.984 h14	0.80	-	0.551 ±0.008	0.16 +0.02	-	10
	908-ST-M20X1.5-AC	908-ST-M20X1.5-AA	908-ST-M20X1.5-AN	M 20 x 1.5	-	-	0.984 h14	0.80	0.94	0.551 ±0.008	0.16 +0.02	0.06	10
908-A4-M20X1.5-A				-	M 20 x 1.5	-	0.984 h14	0.80	-	0.551 ±0.008	0.16 +0.02	-	10
	908-A4-M20X1.5-AC	908-A4-M20X1.5-AA	908-A4-M20X1.5-AN	-	M 20 x 1.5	-	0.984 h14	0.80	0.94	0.551 ±0.008	0.16 +0.02	0.06	10
908-ST-G1/2-A				-	-	G 1/2	1.024 h14	0.84	-	0.551 ±0.008	0.16 +0.02	-	10
	908-ST-G1/2-AC	908-ST-G1/2-AA	908-ST-G1/2-AN	-	-	G 1/2	1.024 h14	0.84	1.02	0.551 ±0.008	0.16 +0.02	0.06	10
908-A4-G1/2-A				-	-	G 1/2	1.024 h14	0.84	-	0.551 ±0.008	0.16 +0.02	-	10
	908-A4-G1/2-AC	908-A4-G1/2-AA	908-A4-G1/2-AN	-	-	G 1/2	1.024 h14	0.84	1.02	0.551 ±0.008	0.16 +0.02	0.06	10
908-ST-M22X1.5-A				M 22 x 1.5	-	-	1.063 h14	0.88	-	0.551 ±0.008	0.16 +0.02	-	10
	908-ST-M22X1.5-AC	908-ST-M22X1.5-AA	908-ST-M22X1.5-AN	M 22 x 1.5	-	-	1.063 h14	0.88	1.06	0.551 ±0.008	0.16 +0.02	0.06	10
908-A4-M22X1.5-A				-	M 22 x 1.5	-	1.063 h14	0.88	-	0.551 ±0.008	0.16 +0.02	-	10
	908-A4-M22X1.5-AC	908-A4-M22X1.5-AA	908-A4-M22X1.5-AN	-	M 22 x 1.5	-	1.063 h14	0.88	1.06	0.551 ±0.008	0.16 +0.02	0.06	10
908-ST-M24X1.5-A				M 24 x 1.5	-	-	1.142 h14	0.96	-	0.551 ±0.008	0.16 +0.02	-	12
	908-ST-M24X1.5-AC	908-ST-M24X1.5-AA	908-ST-M24X1.5-AN	M 24 x 1.5	-	-	1.142 h14	0.96	1.14	0.551 ±0.008	0.16 +0.02	0.08	12
908-A4-M24X1.5-A				-	M 24 x 1.5	-	1.142 h14	0.96	-	0.551 ±0.008	0.16 +0.02	-	12
	908-A4-M24X1.5-AC	908-A4-M24X1.5-AA	908-A4-M24X1.5-AN	-	M 24 x 1.5	-	1.142 h14	0.96	1.14	0.551 ±0.008	0.16 +0.02	0.08	12
908-ST-M26X1.5-A				M 26 x 1.5	-	-	1.220 h14	1.04	-	0.630 ±0.008	0.16 +0.02	-	12
	908-ST-M26X1.5-AC	908-ST-M26X1.5-AA	908-ST-M26X1.5-AN	M 26 x 1.5	-	-	1.220 h14	1.04	1.22	0.630 ±0.008	0.16 +0.02	0.08	12
908-ST-M27X2-A				M 27 x 2	-	-	1.260 h14	1.07	-	0.630 ±0.008	0.16 +0.02	-	12
	908-ST-M27X2-AC	908-ST-M27X2-AA	908-ST-M27X2-AN	M 27 x 2	-	-	1.260 h14	1.07	1.26	0.630 ±0.008	0.16 +0.02	0.08	12
908-ST-G3/4-A				-	-	G 3/4	1.260 h14	1.05	-	0.630 ±0.008	0.16 +0.02	-	12
	908-ST-G3/4-AC	908-ST-G3/4-AA	908-ST-G3/4-AN	-	-	G 3/4	1.260 h14	1.05	1.26	0.630 ±0.008	0.16 +0.02	0.08	12
908-A4-G3/4-A				-	-	G 3/4	1.260 h14	1.05	-	0.630 ±0.008	0.16 +0.02	-	12
	908-A4-G3/4-AC	908-A4-G3/4-AA	908-A4-G3/4-AN	-	-	G 3/4	1.260 h14	1.05	1.26	0.630 ±0.008	0.16 +0.02	0.08	12
908-ST-M30X1.5-A				M 30 x 1.5	-	-	1.417 h14	1.19	-	0.630 ±0.008	0.16 +0.02	-	17
	908-ST-M30X1.5-AC	908-ST-M30X1.5-AA	908-ST-M30X1.5-AN	M 30 x 1.5	-	-	1.417 h14	1.19	1.42	0.630 ±0.008	0.16 +0.02	0.08	17
908-ST-M33X2-A				M 33 x 2	-	-	1.535 h14	1.31	-	0.630 ±0.008	0.20 +0.02	-	17
	908-ST-M33X2-AC	908-ST-M33X2-AA	908-ST-M33X2-AN	M 33 x 2	-	-	1.535 h14	1.31	1.54	0.630 ±0.008	0.20 +0.02	0.08	17
908-ST-G1-A				-	-	G 1	1.535 h14	1.32	-	0.630 ±0.008	0.20 +0.02	-	17
	908-ST-G1-AC	908-ST-G1-AA	908-ST-G1-AN	-	-	G 1	1.535 h14	1.32	1.54	0.630 ±0.008	0.20 +0.02	0.08	17
908-A4-G1-A				-	-	G 1	1.535 h14	1.32	-	0.630 ±0.008	0.20 +0.02	-	17
	908-A4-G1-AC	908-A4-G1-AA	908-A4-G1-AN	-	-	G 1	1.535 h14	1.32	1.54	0.630 ±0.008	0.20 +0.02	0.08	17
908-ST-M42X2-A				M 42 x 2	-	-	1.929 h14	1.67	-	0.630 ±0.008	0.20 +0.02	-	22
	908-ST-M42X2-AC	908-ST-M42X2-AA	908-ST-M42X2-AN	M 42 x 2	-	-	1.929 h14	1.67	1.93	0.630 ±0.008	0.20 +0.02	0.08	22
908-ST-G11/4-A				-	-	G 1 1/4	1.929 h14	1.66	-	0.630 ±0.008	0.20 +0.02	-	22
	908-ST-G11/4-AC	908-ST-G11/4-AA	908-ST-G11/4-AN	-	-	G 1 1/4	1.929 h14	1.66	1.93	0.630 ±0.008	0.20 +0.02	0.08	22
908-A4-G11/4-A				-	-	G 1 1/4	1.929 h14	1.66	-	0.630 ±0.008	0.20 +0.02	-	22
	908-A4-G11/4-AC	908-A4-G11/4-AA	908-A4-G11/4-AN	-	-	G 1 1/4	1.929 h14	1.66	1.93	0.630 ±0.008	0.20 +0.02	0.08	22
908-ST-M48X2-A				M 48 x 2	-	-	2.165 h14	1.90	-	0.630 ±0.008	0.20 +0.02	-	24
	908-ST-M48X2-AC	908-ST-M48X2-AA	908-ST-M48X2-AN	M 48 x 2	-	-	2.165 h14	1.90	2.17	0.630 ±0.008	0.20 +0.02	0.08	24
908-ST-G11/2-A				-	-	G 1 1/2	2.165 h14	1.89	-	0.630 ±0.008	0.20 +0.02	-	24
	908-ST-G11/2-AC	908-ST-G11/2-AA	908-ST-G11/2-AN	-	-	G 1 1/2	2.165 h14	1.89	2.17	0.630 ±0.008	0.20 +0.02	0.08	24
908-A4-G11/2-A				-	-	G 1 1/2	2.165 h14	1.89	-	0.630 ±0.008	0.20 +0.02	-	24
	908-A4-G11/2-AC	908-A4-G11/2-AA	908-A4-G11/2-AN	-	-	G 1 1/2	2.165 h14	1.89	2.17	0.630 ±0.008	0.20 +0.02	0.08	24

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ Fine thread Steel ST	Stainless steel A4	Pipe thread Steel ST Stainless steel A4	d₂ h14	d₃	d₄ Outer Ø sealing washer	l₁ ±0.008	l₂ +0.02	s	A/F in mm

M 8 x 1	M 8 x 1	-	0.472	0.33	0.45	0.315	0.12	0.04	4
M 10 x 1	M 10 x 1	-	0.551	0.41	0.53	0.315	0.12	0.04	5
-	-	G 1/8	0.551	0.39	0.53	0.315	0.12	0.04	5
M 12 x 1.5	M 12 x 1.5	-	0.669	0.48	0.63	0.472	0.12	0.06	6
-	-	G 1/4	0.709	0.53	0.71	0.472	0.12	0.06	6
M 14 x 1.5	M 14 x 1.5	-	0.748	0.56	0.71	0.472	0.12	0.06	6
M 16 x 1.5	M 16 x 1.5	-	0.827	0.64	0.79	0.472	0.12	0.06	8
-	-	G 3/8	0.866	0.67	0.83	0.472	0.12	0.06	8
M 18 x 1.5	M 18 x 1.5	-	0.906	0.72	0.87	0.472	0.16	0.06	8
M 20 x 1.5	M 20 x 1.5	-	0.984	0.80	0.94	0.551	0.16	0.06	10
-	-	G 1/2	1.024	0.84	1.02	0.551	0.16	0.06	10
M 22 x 1.5	M 22 x 1.5	-	1.063	0.88	1.06	0.551	0.16	0.06	10
M 24 x 1.5	M 24 x 1.5	-	1.142	0.96	1.14	0.551	0.16	0.08	12
M 26 x 1.5	-	-	1.220	1.04	1.22	0.630	0.16	0.08	12
M 27 x 2	-	-	1.260	1.07	1.26	0.630	0.16	0.08	12
-	-	G 3/4	1.260	1.05	1.26	0.630	0.16	0.08	12
M 30 x 1.5	-	-	1.417	1.19	1.42	0.630	0.16	0.08	17
M 33 x 2	-	-	1.535	1.31	1.54	0.630	0.20	0.08	17
-	-	G 1	1.535	1.32	1.54	0.630	0.20	0.08	17
M 42 x 2	-	-	1.929	1.67	1.93	0.630	0.20	0.08	22
-	-	G 1 1/4	1.929	1.66	1.93	0.630	0.20	0.08	22
M 48 x 2	-	-	2.165	1.90	2.17	0.630	0.20	0.08	24
-	-	G 1 1/2	2.165	1.89	2.17	0.630	0.20	0.08	24

Build & Price

Selected Part

Part Number

Total (net)

Mex$17.40

Available within 2 weeks

Quantity

Create project list

Save as Favorites

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	99	Mex$24.36
100	249	Mex$22.33
250	499	Mex$20.30
≥ 500		Mex$18.27

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.015 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021